+91 9022084879 | response@aquamechgroup.com

Industrial and Municipal Wastewater Treatment Plant Manufacturer, Exporter in Mumbai, India

Wastewater Treatment Plant

A Wastewater Treatment Plant is a complex process that removes pollutants from wastewater and releases the clean water back into the environment. It is important to understand how it works to choose the right one for your facility. A typical WWTP has several stages, each one with a different purpose. The wastewater is treated to ensure that it is safe to drink, and the treated water is released into the receiving waters again.

A WWTP processes sewage, or wastewater, to remove pollutants and solids from it. It also breaks down organic materials to increase oxygen content in the treated water. The plant uses three operations - primary treatment, secondary treatment, and sludge treatment - to clean wastewater. The wastewater is collected from a network of sewers that connects to homes, schools, industry and businesses. The solids are transported to the WWTP's collection tanks during the treatment process.

The effluent of a WWTP contains a wide range of pollutants. During sludge discharge, fibers from domestic laundry were the most abundant. In addition, there were no detrimental effects on organic load. However, the influent of a WWTP increases the rate of solids accumulation in anaerobic ponds, increasing the rate of solids accumulation from 143 mm to 141 mm per year. This reduced the operating time before desludging and dredging.

How Wastewater Treatment Plant WTP Work?

A wastewater treatment plant is used to clean up wastewater by removing harmful pollutants from the wastewater. The WTP process involves cleaning up wastewater from many sources, including chemical industries, paper, pulp production, and household wastewater. It also handles stormwater and debris in the sewer system. The wastewater treatment process is essential to keep a city clean and healthy, and it is crucial to protect the environment. The process uses physical, chemical, and biological procedures to achieve this goal.

The wastewater treatment process begins with sedimentation. Lighter materials, such as grease, oil, and plastic, float to the surface. These materials are called scum. Slow-moving rakes are used to skim off the scum. Once this solid material has settled, it is pumped to digesters, which becomes sludge. This is the final step of wastewater treatment.

Bioaerosols from WTPs can impact the air quality around them. Studies have shown that aeration tanks at WTPs can increase microbial concentrations in the air, posing a health risk for nearby residents. The presence of a WTP is essential for the health of residents, but it may have negative impacts on the environment. For this reason, the wastewater treatment process must be regulated to ensure public health is not jeopardized.


The quality waste Water treatment plant manufacturers like us ensure the following features of the Equipments:


  • • Reliability in functioning and long life.
  • • Low maintenance cost.
  • • Convenient installation.
  • • Economically priced.
  • • Large specific surface area.
  • • High-efficiency field of treatment.


  • • The plants are suitable for all kinds of waste water .
  • • We have a MBR, MBBR ,SBR Technology.
  • • Capacity : 1 KLD to 1 MLD